Out of stock
 

2X6S RC LiPo Battery Enclosure

$35.00

Temporarily backordered. Order now and we’ll deliver when available about 4-6 weeks.

2X6S 5000mah RC LiPo Battery Enclosures! Our enclosure are quite big and not meant just for 2x6S RC LiPo packs. You could even fit a 8000mah 6S pack in these enclosures. Check your measurements and if they are within our inside dimensions below, they’ll fit!

Inside Dimensions

  • Width – 136mm
  • Height – 60mm
  • Length – 195mm

 

Out of stock

2X6S Enclosure is meant to be fixed to the deck with wood screws. It is simple to remove simply push to the side to expose the bolt head and lift up. This enclosure is meant to fit (2) 6S 5000mah RC LiPo Battery Packs in series for a 12S pack.

The enclosure is convenient to remove and swap RC LiPo Packs.

RC LiPo Packs are secured to the deck with 2? Adhesive Velcro Strips as well as a (2) 1? Velcro Straps which are bolted to the deck.

The enclosure is 3mm thick ABS Thermoforming/Vacuum Formed Battery Enclosure which is in a smooth black glossy finish.

Inside Dimensions

  • Width – 136mm
  • Height – 60mm
  • Length – 195mm

Bolts Used – #6 x 3/8″ to 1″ depending on your longboard deck’s concave. Add weather strip to the lip flange for added vibration support and waterproofing.

Holes will need to be made for your on/off switch and/or you can add in (3) holes on the left/right side to stick your motor wires out from.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Category: