Electric Skateboard Motor 6355 260KV

$90.00

Photo is an older photo but this item is a 6355 260KV Motor in the similar design as the one shown.

Qty

What’s Included

  • (1) 6355 260KV EPOWER Motor (Fits 63mm Motor Mount)
  • (1) 3×3 Keyway Key

Product Description

6355 260KV with maximum size stators! This isn’t your run of the mill “average” 6355 Motor. Our motors have been maximum spec’ed for their current 55mm Width. All the features and upgrades below are now standard for our 6355 260KV motor.

Our 6355 260KV motor was designed specifically for a 6S Battery Setup (22.2 Volts). As much as we always recommend our customers to choose a higher voltage setup 10S/12S battery setup. Many people still enjoy being able to have a 6S battery option.

With our 6355 260KV and 6S Battery Voltage (22.2v) you have a top speed of about 24mph.

  • Max Power: 3100 Watts
  • Max Amps: 80 Amps
  • Max Volts: 12S
  • Recommend ESC: 12S 120A-150A (VESC or 12S TorqueBoards ESC)
  • SHAFT: Diameter 8mm, 32mm length, 2 flat spot w/ 3×3 keyway slot.
  • Motor Wire: 150mm silicone 12AWG wire with 5.5mm Gold Bullet Connector Female.
    • Wire configuration:
      • Blue = A
      • Black = B
      • Yellow = C
  • Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch
    • Internal PCB with 120 Degree Hall Effect Sensors.
    • Motor can be used with or without a sensor. Sensorless operation is most common.
    • VESC Sensor Wires required to use with VESC.
    • Wire configuration:
      • Red = 5v
      • White = Temp
      • Blue = A
      • Yellow = C
      • Green = B
      • Black = GND

 

Why Choose EPOWER Motors?

  • Maximum Size Stator for 6355. Similar stator size to other 6365 motors. Stator size is 52.8mm x 30mm. The biggest we can fit in a 55mm length.
  • Extra long motor shaft which will fit our 12mm wide pulleys. Our motor shafts come in 8mm diameter shaft, keyway slot, two flatspots and a cir-clip.
  • 12awg high strand silicone wire with 5.5mm gold bullet connectors.
  • Sensored motor using hall sensors. You can run your motor sensorless or sensored.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Category: