2X6S RC LiPo Battery Enclosure

$34.99

Quantity

2X6S Enclosure is meant to be fixed to the deck with wood screws. It is simple to remove simply push to the side to expose the bolt head and lift up. This enclosure is meant to fit (2) 6S 5000mah RC LiPo Battery Packs in series for a 12S pack. The enclosure is convenient to remove and swap RC LiPo Packs. RC LiPo Packs are secured to the deck with 2? Adhesive Velcro Strips as well as a (2) 1? Velcro Straps which are bolted to the deck. The enclosure is 3mm thick ABS Thermoforming/Vacuum Formed Battery Enclosure which is in a smooth black glossy finish.

Inside Dimensions

Width – 136mm
Height – 60mm
Length – 195mm

Bolts Used - #6 x 3/8" to 1" depending on your longboard deck's concave. Add weather strip to the lip flange for added vibration support and waterproofing. Holes will need to be made for your on/off switch and/or you can add in (3) holes on the left/right side to stick your motor wires out from.

Questions & Answers

Ask a Question

could this fit 4x3s lipos?

Yes, this will most likely fit 4x 3S Lipos.