Out of stock
 

Electric Skateboard Motor 6355 170KV

$90.00

OUT OF STOCK!

Out of stock

We’ve added a new motor option for those who want more torque on their setup. 6355 170KV with maximized stators!

  • Max Power: 2250 Watts
  • Max Amps: 80 Amps
  • Max Volts: 12S
  • Recommend ESC: 12S 120A-150A (VESC or 12S TorqueBoards ESC)
  • SHAFT: Diameter 8mm, 32mm length, 2 flat spot w/ 3×3 keyway slot.
  • Motor Wire: 150mm silicone 12AWG wire with 5.5mm Gold Bullet Connector Female
    • Blue = A
    • Black = B
    • Yellow = C
  • Sensor Wire: 230mm with 6 pin connector with JST-PH 2mm pitch
    • Red = 5v
    • White = Temp
    • Blue = A
    • Yellow = C
    • Green = B
    • Black = GND
  • Internal PCB with 120 Degree Hall Effect Sensors.

TorqueBoards E-Power 6355 170KV Motors!

  • The best part is we increased the stator size of our motor so you get the same stator size as a 6365 motor! Our new stators are 52.8mm x 30mm. The biggest we can fit in a 55mm length motor.
  • Extra long motor shafts which will fit our 12mm width pulleys. Also has an 8mm motor shaft size, keyway, flatspot and cir-clip.
  • 12awg high strand silicone wire with 5.5mm gold bullet connectors.
  • Sensored motor! Can also be ran sensorless just leave the sensor wires disconnected.
  • Motor Wire: 130mm silicone 14AWG wire with 5.5mm Gold Bullet Connector Female
  • Sensor Wire: 180mm with 6 pin connector with 6-Pin 1.5mm Pitch connector
    • Red = 5v, White = Temp, Blue = A, Yellow = C, Green = B, Black = GND
  • Internal PCB with 120 Degree Hall Effect Sensors.

They are 55mm in length which allows you to fit them on a dual rear setup with our 12mm width belts.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Category: