Electric Skateboard Motor 6380 190KV

MAXIMUM STATOR SIZE - Other motors of similar size use smaller sized stators in the same size motor can length. We do our best to shorten length of our motors and expanding our stators to the biggest size we can fit. This gives you the best of both worlds as we have smaller sized motors and larger sized stators. Ultimately, this means increased performance for less bulk.

BATTLE HARDENED - All motors are battle hardened inside the motor which means we add in another production step to epoxy every neodymium magnet to the motor can. This means that as you rack up the mileage on your powerful motors your magnets stay in place. Loose and falling magnets are a thing of the past.

BATTLE HARDENED PLUS - On top of battle hardened motors, we include mechanical retainers on the back and front side of our neodymium magnets which prevent any shifting or loosening during high performance operation.

CNC VENT HOLES - CNC Vent holes improve efficiency and keep your motors cool. No more overheating motors due to heat and inefficiencies. Your motors will be able to run harder and faster. No more burning out your motors. Vent holes within our design will ultimately keep your motors running cooler than comparable motors with no vent holes. Due to heat not being able to escape from your motor can. Truth be told, vent holes take additional production time to CNC additional holes in each and every motor can which can add production costs to a motor design. All holes have been designed in locations to prevent exposure to rocks and debris while riding. For more rigorous riding we will have an upgraded mesh screen that can be attached to the backend of the motor for complete enclosure from rocks and debris.

UPGRADED HALL SENSORS - We've upgraded our motors with more accurate and efficient sensors by adding a sensor slot on the actual stator. This improves accuracy for using sensors with VESC designed ESCs especially. The accuracy for each hall sensor angle is much closer to each other versus the previous sensor pcb version. Now with the new design sensors are much more unlikely to fail and we get improved accuracy and efficiency. Previous hall sensor differences were about 10-20 degree in angle difference. The new and improved hall sensor differences are about 1-3 degrees in difference. Now that we typically always run motors in sensored mode. This is a huge benefit and upgrade.

HIGH TEMPERATURE MAGNETS - All of our motors use high temperature neodymium magnets to withstand high performance operation. Similar motors will downgrade to lower temperature magnets to lower costs but we want a high quality motor capable of high temperature if needed.

RUBBER SEALED BEARINGS - We use upgraded rubber sealed bearings on all bearings in our motor to extend the life of your motors. Cheaper metal shielded bearings which are very common in other similar sized motors are easier to become contaminated as they are more likely to introduce dirt, dust and grime into your bearings which will result in a shorter bearing life. Rubber sealed bearings have less maintenance. They prevent lubricants from seeping out and contaminants from seeping into the bearing. Take for example on your skateboard wheels, what bearings would you want on your skateboard wheels? Ideally, the rubber sealed bearings so why would you want something different for your electric skateboard motors?

SMOOTHER MOTORS - We add additional rubber sealed bearings support on our all of our motors. Standard motors typically have only 2 bearings even for a larger motor like a 6374 6380 63100. We upgrade all of our motors with an additional 5+ rubber sealed bearings for smoother operation. Motors will typically spin 2-3+ times more than our wheels/tires will spin. Providing additional bearing support is crucial for motors because if our bearings fail our motor will fail.

UPGRADED DRIVE SHAFT - The insane torque that these motors generate can break the shaft from the motor can which result in the motor shaft spinning around inside the motor can. Most motors will typically use smaller screws and inferior methods that result in this being a common occurrence. We've upgraded our drive shaft to include a 4 point system on the end of the motor can to effectively secure the motor shaft to the motor can that can withstand the torque that our motors generate. If this is an issue, our warranty will replace it with a new motor.

CONTINOUS IMPROVEMENT GUARANTEE - We strive to improve efficiency, durability, performance, and reliability which will increase the motor life span. Our guarantee to our customers is that we work to continuously improve our motors after every production run. Every production run we learn and understand how better to improve and produce better motors so our customers have confidence in knowing that they are purchasing the best motor possible. If you have any suggestions, please let us know. We are always trying to improve.

MOTORS DESIGNED IN-HOUSE - We have full CAD designs of the internal components of our motors. This means that we have full control of the production quality of our motors while our designs are a secret and our competitive advantage. We do our best to deliver the best quality motor that we can. Standard motors are now a thing of current times. What does this mean? This means that similar sized motors now have a standard motor which is a motor designed specifically for lower cost and shorter production times but this isn't a good thing because many features and upgrades are sacrificed for the result of less cost and lower production times. Of course, we have the option to do the same but we prefer to offer a higher quality motor at a comparable price point to standard motors in the industry.

6 MONTH WARRANTY - We stand behind the quality and performance of our motors. That’s why we offer a 6-month warranty on all motors, covering any failures with proof of manufacturer defect.

Maximum Performance = These motors will allow you to travel up to speeds of 40-45+ mph. Maximum speed is dependent on available battery power, electronics and gearing ratios. These motors are more powerful than our 6374 motors by over 30.85% increase in total power. They do weight more which is expected but they also run cooler than a dual 6355 or dual 6374 motor build and can withstand higher temperatures. Ideally, these are for those that want more power and an overall better motor.

• Max Power = 4580 Watts
• Max Amps = 95 Amps  
• Max Volts = 4S-12S+ (Capable of more but should be tested.)
• Max Torque = 5.18Nm
• Max RPM = Voltage * KV (190KV)
• Motor Weight = 2.25 lbs
• Recommend ESC = 12S 40-120+ Amps (TORQUE6 Dual ESC)
• Motor Shaft = 8mm Shaft Diameter ROUND/CIRCULAR (Not D Shaped Shaft), 32mm length useable shaft, (2) flat spot w/ 3x3 keyway slot.
• Motor Wire = 200mm silicone 12AWG wire with MT60 Connectors.
• Magnet Poles = 14
• Motor Type = Outrunner
• Sensor Wire = Standard VESC Connector JST-PH 6pin 2.0mm pitch

☑️ What Electric Skateboard Can I Build?

The BEST of the BEST Electric Skateboards can be built with our 6380 Motors. The 6380 motor is similar to the 6384 motor except we’ve built it to be more compact. This allows a larger gap between your motors on a dual motor setup allowing for much more effective cooling which allows you to run your motors harder and more aggressively.

If you want the highest performance by far the dual 6380 motor setup is ideal. A dual 6380 motor setup will allow you to run for hours. You can easily accelerate hard and climb hill after hill and simply just enjoy throttling your beast of an electric skateboard.

Can’t go wrong with the 6380 190KV Electric Skateboard Motor. It’s insanely fun and our best selling motor!

In general, if you want the best and don’t need to upgrade later then the 6380 190KV Electric Skateboard Motor is the motor that you are looking for.

☑️ Will This Motor Fit My Electric Skateboard? Motor Compatibility?

Most likely, yes! Most electric skateboards have a similar motor. The 63 in the 6380 motor is 63mm diameter. You can measure your motor to see if it has a 63mm diameter.

If it has a 63mm diameter, most likely it is compatible. There are a few things to confirm first.

Motor Shaft Shape - Our motor shaft is an 8mm circular motor shaft. The other option is typically a 10mm D shaped motor shaft. They don’t differ too much and there’s not much of a difference. You just need the correct electric skateboard motor pulley.

Motor Shaft Diameter - Diameters are typically 8mm and 10mm. We use an 8mm diameter. If you need a 10mm motor shaft, sometimes you can just replace your electric skateboard motor pulley with our motors and that should fix your issues.

Motor Shaft Length - You can measure the length of your motor shaft to confirm if your motor pulley and drive wheel pulley are in proper alignment.

☑️ Our Recommendations - Who are these motors not for!

If you’re looking for a lightweight setup and are a lightweight rider, consider a dual motor 6355 190KV motor setup.

If you don’t need the heavier 6380 motors and weight similar performance with lighter weight setup than the dual motor 6374 190KV motor setup works also.

☑️ Compatible 6380 Motor Mount

All of our electric skateboard motor mounts are compatible with our 6380 motors. You can also fit a dual 6380 motor setup with our 218mm Longboard Trucks.

Only thing you need to do is pair it with an Electric Skateboard ESC, Electric Skateboard Battery Pack, Electric Skateboard Remote and you’ve got yourself great electronics for a beast of a board.

Pair it with our Electric Skateboard Deck and it’s an easy and simple build.

☑️ Compatible Belt Drive Kit

Easiest mechanical kit to pair this with is our dual motor kit which includes the electric skateboard motor pulleys, electric skateboard drive wheel pulleys and the electric skateboard belts. Everything you need mechanically to get your new electric skateboard up and running.

☑️ What bolts are used to mount the motor?

We use M4x8mm Socket Cap Bolts to secure the motor to our electric skateboard motor mounts. These bolts are typically found in our motor mount kits.

☑️ Are bolts included with the motor?

Bolts are not included with our motors but you can find them included within our motor mount kits.